EMT Practice Test

1. Question Content...

---

Question1: An administrator is creating a new windows VM in AHV after migrating its data from ESXi Which two parameters should be set identically to the VM settings in ESXi? (Choose two)

Question2: Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?

Question3: Which three cluster operations require an administrator to reclaim licenses?(Choose three)

Question4: In the event of failed CVM, what happens to the physically attached storage for the node and the VMs running on it?

Question5: What is Prism Central primarily used for?

Question6: The feature that enables you to back up and restore copies of virtual machines and files to and from an on-prem cluster and a Nutanix Controller VM on the Amazon Web Service (AWS) or Microsoft Azure cloud.

Question7: Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Question8: What are two minimum prerequisites for live migration to succeed? (Choose two.)

Question9: what is the result of a cvm becoming unavailable?

Question10: An administrator needs to configure Acropolis File Service (AFS). The administrator is setting up AFS for the first time on the Nutanix cluster.
How many file services VMs are created by default?

Question11: An Administrator wants to present storage to an external non-Nutanix host via iSCSI.
Which construct should the administrator in configure to create the iSCSI volume?

Question12: Which feature must be enabled in order to ensure that VMs are restarted on other hosts in the event of a host failure?

Question13: An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.
What must the administrator do to meet this requirement?

Question14: what information is shared through pulse? multi answer

Question15: A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?

Question16: An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.
What is the Likely issue?

Question17: Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?

Question18: When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

Question19: An administrator recently executed maintenance on their network. After they would like to verify that this maintenance window did not have any adverse effects on their Nutanix Cluster by running Nutanix Cluster Check (NCC) Which two interface can be used to run NCC? (Choose two)

Question20: what ahv provides hot spot detection and invokes live migration?

Question21: Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

Question22: Which Prism Dashboard should be used to collect CPU/Memory and Disk I/O statistics over time?

Question23: An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?

Question24: An administrator needs to view and compare IOPs for VMs across multiple clusters.
Which two dashboards can the administrator use to find this information? (Choose two)

Question25: An administrator needs to power down an AHV node in order to replace a failed DIMM?
Which step should the administrator take after placing the node into maintenance mode?

Question26: In a default configuration of an AHV cluster, a single node fails.
What happens to the running VMs on that node?

Question27: An administrator wants to be able to manage their application from prism central.
Which feature must the administrator enable to allow for application management?

Question28: An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?

Question29: An administrator has a 3-node Nutanix cluster. The administrator stores critical data on a VM that runs on the cluster Data must still be available through two host failures.
Which three configuration steps must the administrator take to meet this requirement?

Question30: An administrator receives an alert email that indicates that a health check has failed.
Which action should the administrator take to collect more information on the failed check?

Question31: what additional features are available with prism pro(prism central with pro license)? (Choose two)

Question32: Clusters are configured with an http proxy server an administrator wants to deploy prism central Which scenario require to the administrator to configure the http proxy whitelist method?

Question33: Which prism dashboard should an administrator use to set the frequency of NCC?

Question34: An administrator needs to manage VMs from Prism when the cluster is running on ESXi. The VM management options in Prism are grayed out and unavailable.
Which procedure should the administrator complete to manage VMs from Prism when using the ESXi hypervisor?

Question35: What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Question36: An administrator needs to replace the default self-signed certificate in Prism with a certificate signed by a trusted Certificate Authority (CA).
Which option on the task menu should the administrator select to change this configuration?

Question37: Which two targets are valid options when selecting a remote site to Prism? (Choose Two)

Question38: How should an administrator correct an SSL error when connecting to a Nutanix cluster?

Question39: An administrator wants to configure Near Sync an AOS 5.15 implementations. The Cluster has the following characteristic
1) 2 nodes at both the primary and remote site
2) 60 TB of storage on each node
3) 1.9 TB SSD disks in each node
4) 8 VMs per protection domain
5) A mix of ESXi and AHV hypervisor
What three steps would need to be taken successfully enable Near Sync? (Choose Three)

Question40: An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)

Question41: Where should an administrator unregister Prism Element from Prism Central?

Question42: An administrator wants to secure an application running on an AHV cluster by limiting incoming and outgoing traffic destinations. The administrator creates a security policy for the application.
What is the next step?

Question43: An administrator has a 3-node cluster and needs to enable Erasure Coding on a container.
Which action must the administrator take before enabling this feature?

Question44: what command is used to run the nutanix cluster checks from the CVM CLI?

Question45: Which three statements are true about Agent VMs? (Choose three.)

Question46: An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)

Question47: Two HDDs fail simultaneously on a single AHV host.
What are the chances of data loss?

Question48: Which two methods should an administrator employ to set up the AHV host VLAN in a cluster to follow Nutanix recommendations? (Choose two)

Question49: In which two scenarios is an automated live migration likely to occur? (Choose two)

Question50: When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Question51: A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?

Question52: An administrator has a 5-node cluster configured for RF2 with 200 TB of raw disk space. The administrator decides to enable Erasure Coding to gain additional usable space.
Approximately how much usable space would be available after enabling Erasure Coding?

Question53: When does Nutanix recommend performing an AHV upgrade?

Question54: What is default behavior for VM High Availability for Nutanix AHV?

Question55: An administrator needs to shut down and relocate a Nutanix cluster.
Which step should the administrator take after shutting down all guest VMs on the cluster?

Question56: An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?

Question57: A VM user permanently deletes a directory on a guest VM. The Nutanix administrator has enabled Self-Services for this VM.
Which three steps must the administrator perform to restore the directory? (Choose Three)

Question58: Where are Leap Availability Zones configured?

Question59: Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

Question60: An administrator is creating a Protection Domain to back up multiple application environments.
Which mechanism does Nutanix use to aggregate VMs with common backup and restore objectives?

Question61: How should an administrator make sure that the LCM Framework is always up to date and upgraded to the latest version?

Question62: A guest VM should be able to tolerate simultaneous failure of two nodes or drives.
What are the minimum requirements for the Nutanix cluster?

Question63: Refer to the exhibit.

System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?

Question64: An Administrator wants to present storage to an external non-Nutanix host via iSCSI.
Which construct should the administrator in configure to create the iSCSI volume?

Question65: An administrator needs a deploy a Nutanix Cluster that hosts the following workloads
1) 1000 persistent virtual Desktop VMs
2) 100 Generic server VMs
3) 5 Microsoft exchange server VMs
4) 10 SQL server VMs
Which container configuration should be deployed two maximize data efficiency?

Question66: A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?

Question67: An administrator needs to move a Nutanix host from one cluster to another.
Which step should the administrator take after evacuating VMs from the host to be moved?

Question68: An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Question69: An administrator is managing a highly active SQL workload that is writing I/Os in 2 MB chunks to a vDisk. The administrator wants to optimize capacity setting for the computer.
Which storage optimization technology should the administration select to meet these requirement?

Question70: What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

Question71: Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)

Question72: what is the purpose of the nutanix oplog?

Question73: An administrator's cluster experiences a CVM failure. However, VMs on the nodes continue to produce I/O.
Which Distributed Storage Fabric can be attributed to this behavior?

Question74: An administrator needs to modify the configuration of a recently deployed Acropolis File Service (AFS) instance.
Which two are valid configuration setting under the File Service update option? (Choose two)

Question75: CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

Question76: An administrator finds that guest VMs are offline and storage is unavailable. The administrator needs to know if any process within the CVMs on the nutanix cluster are experiencing crashes.
Which log file should the administrator locate to determine if any processes have crashed?

Question77: What is the expected operation during node addition when the new node has a different AOS version?

Question78: In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?

Question79: How many SSL certificates are used by Prism Element on a Nutanix cluster?

Question80: An administrator cables all interfaces on a newly added AHV host and starts migrating VM to 4. Users report that network connections are much slower to the VMs after the migration.
What is a possible reason for this issue.?